• BMR 10-15 5th Gen Camaro V8 auto front driveshaft safety loop in red, made of durable steel for vehicle safety and stability
  • BMR Suspension red 5th Gen Camaro V8 auto driveshaft safety loop under the car, designed for drivetrain protection and safety.
BMR 10-15 5th Gen Camaro V8 auto front driveshaft safety loop in red, made of durable steel for vehicle safety and stability
BMR Suspension red 5th Gen Camaro V8 auto driveshaft safety loop under the car, designed for drivetrain protection and safety.
Protect your 2010-2015 Camaro, while complying with NHRA safety rules with a Driveshaft Safety Loop from BMR's suspension. If you drag race your Camaro, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1/4-inch laser-cut CNC-formed plate steel, BMRs DSL015 Driveshaft Safety Loop bolts-on using OE mounting holes from the factory transmission crossmember. This design gives you a solidly mounted loop that will stay in place should a driveshaft or transmission failure occur.BMR's suspension designed the Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure. It simply attaches to the factory transmission crossmember with supplied Grade 8 hardware. BMR designed the DSL015 for street, drag race, and top speed applications. A Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street. When performance is a must, rely on BMR's suspension!NOTE: Fits V8 manual, and V6 auto Camaros. Does not fit ZL1.NOTE: This part was designed to be used with a TWO PIECE DRIVESHAFT.BMR's suspensions DSL015 bolt-on Driveshaft Safety Loop is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
2010-2015 Chevrolet Camaro LS
2010-2015 Chevrolet Camaro LT
2010-2015 Chevrolet Camaro SS

BMR Suspension

BMR 10-15 5th Gen Camaro V8 Auto Front Driveshaft Safety Loop - Red

SKU BMRDSL015R
$129.95
Protect your 2010-2015 Camaro, while complying with NHRA safety rules with a Driveshaft Safety Loop from BMR's suspension. If you drag race your Camaro, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1/4-inch laser-cut CNC-formed plate steel, BMRs DSL015 Driveshaft Safety Loop bolts-on using OE mounting holes from the factory transmission crossmember. This design gives you a solidly mounted loop that will stay in place should a driveshaft or transmission failure occur.BMR's suspension designed the Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure. It simply attaches to the factory transmission crossmember with supplied Grade 8 hardware. BMR designed the DSL015 for street, drag race, and top speed applications. A Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street. When performance is a must, rely on BMR's suspension!NOTE: Fits V8 manual, and V6 auto Camaros. Does not fit ZL1.NOTE: This part was designed to be used with a TWO PIECE DRIVESHAFT.BMR's suspensions DSL015 bolt-on Driveshaft Safety Loop is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
2010-2015 Chevrolet Camaro LS
2010-2015 Chevrolet Camaro LT
2010-2015 Chevrolet Camaro SS
$129.95

BMR 10-15 5th Gen Camaro V8 auto front driveshaft safety loop in red, made of durable steel for vehicle safety and stability BMR Suspension red 5th Gen Camaro V8 auto driveshaft safety loop under the car, designed for drivetrain protection and safety.
BMR 10-15 5th Gen Camaro V8 auto front driveshaft safety loop in red, made of durable steel for vehicle safety and stability BMR Suspension red 5th Gen Camaro V8 auto driveshaft safety loop under the car, designed for drivetrain protection and safety.

Protect your 2010-2015 Camaro, while complying with NHRA safety rules with a Driveshaft Safety Loop from BMR's suspension. If you drag race your Camaro, chances are you need a driveshaft safety loop to be NHRA legal. Built from 1/4-inch laser-cut CNC-formed plate steel, BMRs DSL015 Driveshaft Safety Loop bolts-on using OE mounting holes from the factory transmission crossmember. This design gives you a solidly mounted loop that will stay in place should a driveshaft or transmission failure occur.BMR's suspension designed the Driveshaft Safety Loop to contain a driveshaft, keeping it from ripping through the floor or digging into the track in event of a failure. It simply attaches to the factory transmission crossmember with supplied Grade 8 hardware. BMR designed the DSL015 for street, drag race, and top speed applications. A Driveshaft Safety Loop is cheap insurance to protect your investment and provide peace-of-mind whether you are at the track or on the street. When performance is a must, rely on BMR's suspension!NOTE: Fits V8 manual, and V6 auto Camaros. Does not fit ZL1.NOTE: This part was designed to be used with a TWO PIECE DRIVESHAFT.BMR's suspensions DSL015 bolt-on Driveshaft Safety Loop is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!

This Part Fits:

Year Make Model Submodel
2010-2015 Chevrolet Camaro LS
2010-2015 Chevrolet Camaro LT
2010-2015 Chevrolet Camaro SS

Frequently Bought Together

Total price$1,279.95